Where can i get info on how to change oil and oil filter for car/pickup, With good detail.?

Its really not that hard. Go and pick up a Haynes repair manual for your vehicle at any local auto parts place.Where can i get info on how to change oil and oil filter for car/pickup, With good detail.?i own a repair shop,and if you,ll go to any advance auto parts store they sell a good manual called a Haynes repair manual and in it is all the information you will need on your vehicle ,it has everything for just about any job you might want to do,and there only around 15 bucks,but there worth a million in information,good luck i hope this help,s.Where can i get info on how to change oil and oil filter for car/pickup, With good detail.?Read your owners manual first if you have one. If not then buy a Haynes or Chiltons manual. Get a socket set, a oil pan, and then a oil filter wrench for the vehicle that you performing it on. A oil change shouldn't take more then 10-15 min on your own.Where can i get info on how to change oil and oil filter for car/pickup, With good detail.?First you must jack the car up in order to crawl underneath it. Do not rely on jacks alone. You can buy a couple of %26quot;Jackstands%26quot; reasonably at any auto store.



Having secured your car, you can then place a pan underneath the engine to catch the oil when you remove the drain plug. Use a good sized Crescent Wrench. Don't lose the plug in the process.

Loosen the plug then remove it slowly by hand, when the oil starts to come out. remove the plug quickly and get out of the way fast. The oil will come rushing out at first.



Replace the plug and tighten it securely, then with a special tool remove the Oil Filter which will be a cannister located on one side underneathe the Engine.

You cannot remove it by hand, but you must replace it and tighten it by hand, Make it as tight as you can by hand.

Fill the crankcase with the recommended about of oil and start the Engine. After it has run for a couple of minutes, turn it off and check the level with the Dipstick. Fill to required amount if necessary. The top line on the dipstick.



job finsihed.Where can i get info on how to change oil and oil filter for car/pickup, With good detail.?I know most people are telling you to get a Haynes manual, but if you don't have a lot of experience working on cars you should get a Chilton's manual. Chilton's manuals are more illustrated and easier to read for a novice.



Changing the oil in your car is one of the easier things for a novice to do. When you do it once you don't really ever forget how to do it.Where can i get info on how to change oil and oil filter for car/pickup, With good detail.?Right here. Everything you need to know can be handwritten on one sheet of paper. Warm up the engine. Put a good-size pan under the car that will hold at least a couple of gallons, unscrew the plug from the oil pan, let the oil dump into the pan, (it's going to be kind of hot so don't touch it) screw the plug back in firmly with a wrench, but not like Godzilla, unscrew the old oil filter using an oil filter wrench if needed, put a film of oil on the gasket of the new filter, screw it on, tighten it good and snug with your hand, again not like Godzilla, dump the recommended number of quarts of new oil in the top of the motor in the hole marked %26quot;engine oil%26quot;, start it up, wait a couple of minutes, shut it off, wait a minute, check the oil again, add as needed.