Thursday, November 25, 2010

When changing oil filter, Is the oil filter wrench or something needed?

I have honda accord LX-P 2009. I am ready for change motor oil and oil filter. But I am wondering...



Do I have to use the oil filter wrench? How about using just my hands and its force?When changing oil filter, Is the oil filter wrench or something needed?Your hands aren't going to cut the mustard. Buy a quality *cup style oil filter wrench and a 3/8 ratchet to remove oil filters.When changing oil filter, Is the oil filter wrench or something needed?If the filter was properly installed, you shouldn't need a wrench to remove it. 1/4 turn past thread tight to install.When changing oil filter, Is the oil filter wrench or something needed?If you can turn it with your hands alone, do it, or else an oil filter wrench wil lbe necessary, that's what they're made for, but only install hand tight, use no wrench.

Make sure to clean the seat good and coat with a light coat of oil or grease before installing new filter.When changing oil filter, Is the oil filter wrench or something needed?If the old filter was properly installed, it should be able to be removed by hand. If not, you can buy a filter wrench at any parts store/Walmart, etc. Follow directions when installing the new one, and you should have no problems.When changing oil filter, Is the oil filter wrench or something needed?While it is true that if the filter was installed correctly you should be able to remove it by hand, 99% of the time they are installed too tightly. When you purchase the oil filter for it, find the cup style oil filter wrench that fits the filter. They fit on a 3/8%26quot; drive ratchet and will make things so much easier. When installing the new filter, first check to make sure the old base gasket is not stuck to the engine, then smear a light coat of the old oil on the gasket of the new filter. Screw the new filter on by hand until the gasket just makes contact with the engine, then tighten an additional 3/4th's of a turn by hand. Do not use the wrench to install the new filter, only to remove the old one.When changing oil filter, Is the oil filter wrench or something needed?i install them all day long in a lube shop and very close to all of them go on by hand aside from the canister type. hand tight will do just fine as long as you have a good grip and lube the gasket prior to installation.

No comments:

Post a Comment